Canon imageRUNNER ADVANCE C3330i Wartungsanleitung Seite 42

03
Pull out the empty staple case from the
staple cartridge.
1. Press the areas indicated by PUSH on both sides of
the staple cartridge.
2. Pull up the clear part.
3. Remove the empty staple case.
1
2
04
Remove the new staple case from its
box.
IMPORTANT
Do not remove the seal that holds the staples together
with a tag before you place the staple cartridge into the
staple case.
42
Replacing the Staple Case in the Staple Unit (Staple Finisher-U1/Booklet Finisher-U1)
1
3
05
Insert a new staple case into the staple
cartridge.
1. Insert a new staple case.
2. Push down the clear part.
3. Hold the tag of the seal, and pull it straight out.
2
IMPORTANT
Only one staple case can be inserted at a time.
)
Make sure that you pull the seal straight out. If you
)
pull it out at an angle, it may tear.
06
Gently push the staple cartridge back
into the finisher and push down firmly until
it is securely in place.
07
Close the front cover of the finisher.
CAUTION
When closing the front cover of the finisher, be careful
not to get your fingers caught, as this may result in
personal injury.
NOTE
After the cover is closed, the stapler unit may
automatically perform a "dry" stapling operation to
reposition the staples.
1
3