Husqvarna RC 455 Bedienungsanweisung Seite 24

Menu functions
Error message (7)
"No contact Check the CAN cable"
Cause (7)
The CAN cable, or its connector is damaged, which
results in the hydraulic unit not being possible to control
via the remote control.
Action (7)
Press OK to acknowledge the error message. Check the
cable and connector and replace if damaged. Contact the
service personnel if the fault remains.
Error message (8) - applies to units equipped with a
radio system
"No radio contact"
Cause (8)
The radio contact between the hydraulic unit and remote
control is not working.
Action (8)
Several actions may be necessary to rectify the fault:
• Ensure (via the operations menu - settings - radio id)
that the identity number is greater than 0.
• Make sure that the hydraulic unit has been started.
• Move closer to the hydraulic unit to prevent long
distances or reinforced walls.
Restart the remote control. Contact the service personnel
if the fault remains.
24 - English
Operator's Manual RC 455