Husqvarna RC 455 Bedienungsanweisung Seite 16

Menu functions
CAUTION
Long electrical cables with a small core cross
section can result in a voltage drop. Even long
hydraulic hoses can be affected by a pressure
drop.
4. Settings
Via this sub-menu a number of values can be changed
to affect the hydraulic unit's characteristics.
To access the sub-menu: State the four digit PIN-code
0012 with the help of the arrow keys and the OK
button.
To save the settings; select "Save" in sub-menu 3 "OUT
SETTINGS".
Refer to the "SETTINGS" section for complete
information about the setting options,
5. Time
The function is used to measure the amount of time a
job takes. The time is counted from when the saw
starts working. Select:
• ON, to enable.
• OFF, to disable.
• RESET TIME, to reset.
Quit by pressing OK. The main information "Status" is
then shown on the display.
When you select time ON (and when the hydraulic unit
is operational, see 1.b) 00:00 is also shown in the
lower right corner of the display. Press arrow down to
continue in the operations menu.
The total time that the hydraulic unit has been
operational is shown here. The time is stated in hours
and minutes (hhhh:mm).
16 - English
7. Battery status (only machines equipped with a radio)
This function checks the remote control's battery.
Different messages are shown on the display,
depending what is currently happening with the
battery:
• 0% BATTERY 100%
When the remote control is connected and the battery
is being charged a horizontal column is shown below
the 0 % - 100 % scale. The column length against the
scale shows how much of the charge remains in the
battery.
• CHARGING THE BATTERY
Show when the remote control is connected and the
battery is charging. The charging time from 0 % to
100 % is approximately 9 hours.
• BATTERY FULLY CHARGED
Shown when the battery is charged to 100 %.
• BATTERY DISENGAGED
shown when the battery is disengaged from the remote
control. The message is also shown when the charging
unit in the remote control has been damaged.
Operator's Manual RC 455