Product Description And Specifications - Bosch PWR 180 CE Originalbetriebsanleitung

OBJ_BUCH-2193-004.book Page 24 Friday, September 9, 2016 9:08 AM
24 | English
Symbol Meaning
To connect the vacuum hose to the
handpiece, dust container or extraction
adapter, you have to insert the vacuum
hose into the socket of the respective
connecting piece until the two snap-fas-
teners engage ("CLOSE").
To disconnect it, press the snap-fasten-
ers inwards and turn the vacuum hose
slightly ("OPEN"). Then pull the compo-
nents apart.
"EasyAdapt"
The extraction adapter enables various
brands of vacuum cleaner to be connect-
ed to the vacuum hose.
"Bagless Filter Technology"
The bagless filter system removes the
need to use dust bags.
"EasyClean"
To quickly clean the filter element, turn
the filter lid at least three times.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The power tool is intended for dry sanding of walls and ceilings
in indoor and outdoor areas, for sanding filled drywall surfaces,
for removing paint, wallpaper and adhesive residues, for dry
surface-sanding of metal, stone and wood, for dry sanding-
down of coatings, for dry sanding and smoothing of concrete,
plaster and screed, for perforating wallpaper on hard surfaces,
for removing tile adhesive and dry carpet adhesive residues
from hard surfaces (hard plaster, concrete), for smoothing
formwork joints and roughing concrete surfaces.
The power tool must be used together with the matching dust
container or a dust class M vacuum cleaner.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
Handpiece of the wall processing system
1 Handpiece
2 Direction-of-rotation arrow for sander spindle
3 Spindle lock button
4 Auxiliary handle (insulated gripping surface)
5 On/Off switch
6 Handle (insulated gripping surface)
7 Thumbwheel for speed preselection
1 609 92A 1LR | (9.9.16)
8 Vacuum connection
9 Wing bolt for adjustment of auxiliary handle
10 Guard and extraction hood
11 Hood segment
12 Brush collar
13 Fan wheel
14 Sander spindle
15 Mounting flange
16 Spring washer
17 Clamping nut
18 Two-pin spanner
19 Hook wrench
Extraction
20 Vacuum hose
21 Snap-fastener
22 Velcro strap*
23 Extraction adapter*
Dust container*
24 Dust container
25 Filter lid
26 Carrying handle with resting recess for handpiece
27 Fastening clips of the filter lid
28 Hose connection piece
29 Rear wheel
30 Holder for vacuum hose
31 Filter element (filter system for fine dust)
32 Opening
Application tools*
33 Wire brush
34 Perforator
35 Carbide cup wheel
36 Diamond cup wheel
37 Sanding plate
38 Sanding sheet
39 Backing pad
40 Foam disc
41 Backing pad for fibre sanding disc
42 Fibre sanding disc
43 Round nut
44 Brush segment (plastic, brass, steel)
45 Spacer disc
*Some accessories shown or described are not part of the standard
delivery scope of the product. A complete overview of accessories
can be found in our accessories program.
Noise/Vibration Information
Sound emission values determined according to
EN 60745-2-3.
Typically the A-weighted noise levels of the product are:
Sound pressure level 91 dB(A); Sound power level
102 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Bosch Power Tools