General Safety Instructions - Graf KLsepa.compact Betriebs- Und Wartungshandbuch

1. General safety instructions

This section contains information on safety measures and residual risks. Read this
chapter carefully before using the system to ensure safety in handling of the system.
The applicable accident prevention regulations must be observed during all work.
Particularly during the walk through of the tanks, a second person should be present for
safety reasons.
Furthermore, all relevant regulations and standards must be observed during assembly,
installation, maintenance and repair. Details hereto can be found in the respective
paragraphs of this operating manual.
The installation of the system and individual components must be carried out by a
specialised company. The overall system must be shut down during all work on the
system or the components.
The tank cover must remain closed at all times, except for work inside the tank,
otherwise there is a risk of accident. The rain protection mounted at delivery only serves
as packaging for the transport and is not accessible or childproof. It must be removed
immediately upon delivery and replaced by an appropriate cover (telescopic dome shaft
with respective cover).
Only covers that comply with EN124 and DIN 1999 must be used.
1.1. Marking obligation
All covers of the separator system must be marked accordingly with "separator", DIN
1999 and the class of the cover according to EN 124. Furthermore, the provided
identification plate must be attached in a clearly visible manner at one of the access
shafts.
1.2. Explanation of Warnings and Prohibitions
Hazard warning
Warning of dangerous electrical voltage
Warning of danger of falling
Warning of hand injuries
Warning of explosive atmospheres
Prohibition of fire, open flames, and smoking
1. General safety instructions
KLsepa.compact
16