Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1.4.
Warnings
Always observe these instructions as personal injury or property damage may result
otherwise!
Make sure that the warning system is not installed above or in the immediate
vicinity of water vessels. Risk of electric shock in case of improper
installation.
Installation
site
Always connect the warning system to a properly installed 230 V socket or
grounded socket that is protected with a 16A fuse in accordance with the
technical specifications.
In the event of a thunderstorm, electrical equipment connected to the mains
Electrical
may be damaged. An overvoltage protection device in the building installation
supply circuit
is recommended as protection. The connection lines must be laid in a manner
that they do not present a tripping hazard.
The warning system must not be installed or switched on in environments
with a potentially explosive atmosphere or in places where combustible
materials are present. Sparks in such environments could cause explosion or
fire, which can lead to injury or death..
Explosive
Atmospheres
The warning system must not be operated if the housing or the insulation of a
line is damaged or dented.
Damages
Servicing of the system must be carried out by authorised, qualified personnel
or qualified electricians.
Servic work
The power supply must be guaranteed at all times. Please make sure of that.
Additional power consumers on the same fuse may disrupt operation.
Power supply
1. General safety instructions
KLsepa.compact
18
Werbung
Inhaltsverzeichnis
