Installation; Mounting The Lens - Sony DXC-950P Gebrauchsanweisung

Installation

Mounting the Lens

Only 1 / -inch bayonet-mount lenses can be attached to the
2
camera.
2
For / -inch lenses, an LO-32BMT lens mount adaptor (not
3
supplied) is required.
1
Turn the mount lever counterclockwise as far as it goes.
(If the lens mount cap is in place, remove it.)
2
Align the positioning pin on the lens with the matching
hole in the lens mount and attach the lens.
Align the pin
with the
hole.
18
Mount lever
3
Turn the mount lever clockwise as far as it goes to lock
the lens in the lens mount.
4
If the lens is a 2 / -inch type, connect the lens cable to
3
the camera's LENS connector.
(This step in not necessary for
Mount lever
1
/ -inch lenses.)
2
to LENS connector
of the camera
Lens cable