Basic System Connection - Sony DXC-950P Gebrauchsanweisung

Basic System Connection

To supply power to the camera, use the CMA-D2CE/
D2MDCE camera adaptor (not supplied).
There are two connection methods, one using a CCDC
cable and the other using a CCMC cable. The CCDC cable
only supplies power to the camera. The CCMC cable
supplies power to the camera and transmits video signals
from the camera back to the camera adaptor.
Power supply
Use only with the following camera adaptor or camera
control unit according to the use.
Camera adaptor or camera control unit
For medical use
CMA-D2MDCE
For more details, contact your Sony dealer.
20
For non-medical use
CMA-D2CE
CCU-M5P
Note on use of camera adaptors
Although the CMA-D2CE/D2MDCE camera adaptor has
two CAMERA connectors (4-pin and 12-pin), the power
consumption of the DXC-950P is such that two camera
units cannot be connected at the same time. Be sure to use
one camera adaptor for each DXC-950P unit.
Note on connections
Be sure to turn off power supply for all equipment before
making any connections.