Sony DXC-950P Gebrauchsanweisung Seite 44

Changing the Camera Settings
Gamma [on/off]
Compensates gamma.
on Compensates the reproduction characteristics of the
screen to produce natural-tone images. Use this
setting for normal camera use.
off Outputs the video signal linearly from the CCD without
gamma compensation. Use this setting when you
want to produce images for image processing or
image analysis.
Knee [1/2]
The two following knee positions are available:
1 Used in normal shooting conditions.
2 Used when shooting a dark object and a highly
illuminated object at the same time.
G sync [on/off]
Adds a sync signal to the G signal in the RGB output.
on Select when using a video monitor without a sync
input connector. A sync-added G signal can be output
from the camera's
panel).
off A sync signal is not added to the G output signal.
44
RGB/SYNC connector (rear
4. System Setup menu (page 4)
Mem.Bank [A/B]
This camera has two memory banks (A or B) for storing
settings. You can record a different group of settings in
each bank, and switch to the bank most suitable for the
shooting conditions at hand. The selected memory bank is
shown in the upper left corner of the menu.
Mem.Protect [on/off]
You can protect each memory bank by setting "Mem.Protect"
to on. If the memory bank is protected, the memory bank (A
or B) indicator in the upper left corner of the menu flashes.
Note that the following items can be changed even when a
memory bank is protected.
Page 1: "Gain", "Shutter"
Page 2: "C.Temp", "WHT.Bal"
Page 4: "Mem.Bank", "Mem.Protect", "Data Send"