About This Document; Product Description; Battery Exchange - SICK C4000 Betriebsanleitung

O P E R A T I N G I N S T R U C T I O N S
Host Guest Plug
for C4000
safety light curtains
GB
SICK AG • Industrial Safety Systems
Sebastian-Kneipp-Straße 1
D-79183 Waldkirch • www.sick.com
8011556/23-02-06 • RV/KE
Printed in Germany (03.06) • All rights
reserved • Product properties and technical
specifications given do not represent any form
of warranty or assurance of properties.
1

About this document

This device manual is only valid in conjunction
with the operating instructions for the
corresponding C4000 safety light curtain.
2 On safety
Safety notes
Use Host9Guest Plug only with C4000
safety light curtains approved for this
purpose.
After using Host9Guest Plug you must
perform all checks before initial
commissioning in conjunction with
C4000. Read the chapter on
"Commissioning" in the relevant
operating instructions.
This device manual must be given to
the user of the Host9Guest Plug
together with the relevant operating
instructions for the C4000.
3

Product description

Host9Guest Plug is used to reset a system
position saved in C4000.
If safety light curtains are used in a cascaded
Fig. 1: Resetting a C4000
system, the system position (Host, Guest1 or
Guest2) is stored permanently in the device
memory of the C4000. The device can no
longer be used as a standalone device or in a
different system position.
All other configured functions such as EDM,
PSDI, blanking, etc. are not reset by
Host9Guest Plug and remain unchanged.
4

Battery exchange

Host9Guest Plug indicates a low battery level
with a flashing yellow LED.
Notes
Remove the battery before disposing of the
Host9Guest Plug.
Dispose of removed batteries in accordance
with applicable legislation.
Fig. 2: Battery exchange