Sub-Assembly: Wire Cutting Device; Optional Assemblies/Accessories En; Maintenance Unit - Abicor Binzel BRS-LCi SPS Betriebsanleitung

BRS-LCi PLC
5.3 Sub-assembly: wire cutting device (DAV—externally controlled)
NOTICE
• The DAV is not controlled via the control box!
• It is directly controlled by the 5/2 directional valve on e.g. a robot.
1
9 8
1 Short stroke cylinder
2 Cover with lubricating nipple
3 Bracket
Fig. 6 Wire cutting device (DAV) sub-assembly
The valve for the DAV is only provided if specifically ordered and must be installed by the operator.
It can be attached to the injection valve island (5).
5.4 Optional assemblies/accessories
Prism Anti-twist fastening with an M5x16 cylinder head screw in the clamping device.
Reamer The reamer dimensions are determined based on the gas nozzle and torch geometry for an immersion
depth of up to 50 mm. The reamer can be provided for all standard WH and robot torch versions with
nominal diameters from 13 mm to 19 mm.

Maintenance unit

ID 830.0075
Consists of a filter regulator and oiler.
The maintenance unit removes solid particles from the compressed air and adds atomized oil for
lubricating the pneumatically driven components.
5/2 directional valve ID 831.0729
The valve for the DAV is only provided if specifically ordered and must be installed by the operator.
It can be attached to the injection valve island (5).
Tab. 15 Options/accessories
2 3 4
7 6
4 Jaws
5 Injection valve block with empty space
6 Cutter
5 Functional description
5
7 Pressure spring
8 Slide
9 Housing
EN - 13