Signs And Symbols Used En; Scope Of Delivery; Transport - Abicor Binzel BRS-LCi SPS Betriebsanleitung

4 Scope of delivery

3.4 Signs and symbols used
• The following signs and symbols are used in the operating instructions:
Symbol Description
• Bullet symbol for instructions and lists

Cross reference symbol refers to detailed, supplementary, or further information
1
Step(s) described in the text to be carried out in succession
4 Scope of delivery
• Fully assembled BRS-LCi PLC torch cleaning station
• Anti-spatter fluid (1 liter bottle)
• 1 distance sleeve for gas nozzles with a nominal diameter of up
to 15.5 mm
• 1 distance sleeve for gas nozzles with a nominal diameter of up
to 21 mm
Tab. 12 Scope of delivery
• Wire cutting device (externally controlled)
Tab. 13 Options
NOTICE
• A clamping prism and a reamer are required for the initial set-up and to make the torch cleaning
• The DAV comes attached to the BRS. The system operator must provide a suitable control unit. The
Order the equipment parts and wear parts separately.
The order data and ID numbers for the equipment parts and wear parts can be found in the current catalog.
Contact details for advice and orders can be found online at www.binzel-abicor.com.

4.1 Transport

Although the items delivered are carefully checked and packaged, it is not possible to fully exclude the risk
of transport damage.
Goods-in inspection Use the delivery note to check that everything has been delivered.
Check the delivery for damage (visual inspection).
In case of complaints If the delivery has been damaged during transportation, contact the last carrier immediately. Retain the
packaging for potential inspection by the carrier.
Packaging for returns Where possible, use the original packaging and the original packaging material. If you have any
questions concerning the packaging and/or how to secure an item during shipment, please consult your
supplier.
Tab. 14 Transport
4.2 Storage
Physical storage conditions in a closed environment:
 Tab. 2 Ambient conditions for transport and storage on page EN-8
EN - 10
station functional. These depend on the torch and gas nozzle geometry.
solenoid valve required for control is not provided.
• Connection set with non-return valve
• 1 distance sleeve for gas nozzles with nominal diameters
from 16 mm to 19 mm
• Operating instructions
• 5/2 directional valve for controlling the DAV
BRS-LCi PLC