Functional Description; Sub-Assemblies Accessories / Options En - Abicor Binzel BRS-LC Betriebsanleitung

BRS-LC

5 Functional description

For cleaning, the torch is clamped with the cylindrical part of the gas nozzle in the clamping device. The
milling tool which is configured to the gas nozzle and torch geometry moves into the gas nozzle interior by
means of a stroke movement and removes adhering welding spatter. At the same time, the gas nozzle interior
is cleaned with compressed air blown through the cable assembly (option). Hereby, the cleaning process is
optimized in connection with an optional air-blast function.
1
2
3
4
5
Fig. 3
5.1 Sub-assemblies accessories / options
Prism Anti-twist fastening with cylinder head screw M8x20 in clamping device. (Available for all common gas
nozzles as a function of the gas nozzle diameter).
Milling tool The milling tool dimensions are determined based on the gas nozzle and torch geometry for an immersion
depth up to 50 mm. Available for all standard WH and robot torch versions.
Tab. 11 Accessories
13
12
11
10
9
8
Covering hood 6
Torch-specific prism 7
Pneumatic connection 8
Cable gland 9
Silencer
Torch cleaning station sub-assembly BRS-LC
2
1
7
Compressed air hose 10 Guide block
Terminal block 11 milling tool stroke 50 mm
Frame 12 Torch-specific milling tool
Compressed-air motor 13 Clamping device
5 Functional description
3
4
5
6
EN - 9