The control panel must be connected to specified heating unit with
•
matching colours of connectors, to avoid possible hazard.
WARNING: The appliance and its accessible parts become hot during
•
use. Care should be taken to avoid touching heating elements.
Always use oven gloves to remove or put in accessories or ovenware.
•
Before carrying out any maintenance, disconnect the appliance from the
•
power supply.
Ensure that the appliance is switched off before replacing the lamp to
•
avoid the possibility of electric shock.
Do not use a steam cleaner to clean the appliance.
•
Do not use harsh abrasive cleaners or sharp metal scrapers to clean the
•
glass door since they can scratch the surface, which may result in
shattering of the glass.
If the mains power supply cable is damaged, it must be replaced by the
•
manufacturer, its Authorised Service Centre or similarly qualified persons
to avoid an electrical hazard.
To remove the shelf supports first pull the front of the shelf support and
•
then the rear end away from the side walls. Install the shelf supports in the
opposite sequence.
The means for disconnection must be incorporated in the fixed wiring in
•
accordance with the wiring rules.
Safety instructions
Installation
Warning! Only a qualified person must
install this appliance.
•
Remove all the packaging.
•
Do not install or use a damaged appliance.
•
Follow the installation instructions supplied with the
appliance.
•
Always take care when moving the appliance as it is
heavy. Always use safety gloves and enclosed
footwear.
•
Do not pull the appliance by the handle.
•
The kitchen cabinet and the recess must have
suitable dimensions.
•
Keep the minimum distance from other appliances
and units.
•
Install the appliance in a safe and suitable place that
meets installation requirements.
•
Parts of the appliance carry current. Close the
appliance with furniture to prevent touching the
dangerous parts.
•
The appliance is equipped with an electric cooling
system. It must be operated with the electric power
supply.
Electrical connection
Warning! Risk of fire and electric shock.
•
All electrical connections should be made by a
qualified electrician.
•
The appliance must be earthed.
•
Make sure that the parameters on the rating plate
are compatible with the electrical ratings of the
mains power supply.
•
Always use a correctly installed shockproof socket.
•
Do not use multi-plug adapters and extension
cables.
•
Make sure not to cause damage to the mains plug
and to the mains cable. Should the mains cable
need to be replaced, this must be carried out by our
Authorised Service Centre.
3