Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Ensure that the appliance is switched off before replacing the lamp to
•
avoid the possibility of electric shock.
Do not use a steam cleaner to clean the appliance.
•
Do not use harsh abrasive cleaners or sharp metal scrapers to clean the
•
glass door since they can scratch the surface, which may result in
shattering of the glass.
If the supply cord is damaged, it must be replaced by the manufacturer, its
•
Authorised Service Centre or similarly qualified persons in order to avoid a
hazard.
To remove the shelf supports first pull the front of the shelf support and
•
then the rear end away from the side walls. Install the shelf supports in the
opposite sequence.
The means for disconnection must be incorporated in the fixed wiring in
•
accordance with the wiring rules.
Safety instructions
Installation
Warning! Only a qualified person must
install this appliance.
•
Remove all the packaging.
•
Do not install or use a damaged appliance.
•
Obey the installation instruction supplied with the
appliance.
•
Always be careful when you move the appliance
because it is heavy. Always wear safety gloves.
•
Do not pull the appliance by the handle.
•
The kitchen cabinet and the recess must have
suitable dimensions.
•
Keep the minimum distance from the other
appliances and units.
•
Make sure that the appliance is installed below and
adjacent safe structures.
•
Parts of the appliance carry current. Close the
appliance with furniture to prevent touching the
dangerous parts.
•
The sides of the appliance must stay adjacent to
appliances or to units with the same height.
Electrical connection
Warning! Risk of fire and electrical
shock.
•
All electrical connections should be made by a
qualified electrician.
•
The appliance must be earthed.
All manuals and user guides at all-guides.com
•
Make sure that the electrical information on the
rating plate agrees with the power supply. If not,
contact an electrician.
•
Always use a correctly installed shockproof socket.
•
Do not use multi-plug adapters and extension
cables.
•
Make sure not to cause damage to the mains plug
and to the mains cable. Should the mains cable
need to be replaced, this must be carried out by our
Authorised Service Centre.
•
Do not let mains cables touch or come near the
appliance door, especially when the door is hot.
•
The shock protection of live and insulated parts
must be fastened in such a way that it cannot be
removed without tools.
•
Connect the mains plug to the mains socket only at
the end of the installation. Make sure that there is
access to the mains plug after the installation.
•
If the mains socket is loose, do not connect the
mains plug.
•
Do not pull the mains cable to disconnect the
appliance. Always pull the mains plug.
•
Use only correct isolation devices: line protecting
cut-outs, fuses (screw type fuses removed from the
holder), earth leakage trips and contactors.
•
The electrical installation must have an isolation
device which lets you disconnect the appliance from
the mains at all poles. The isolation device must
have a contact opening width of minimum 3 mm.
•
This appliance complies with the E.E.C. Directives.
3
Werbung
Inhaltsverzeichnis
Fehlerbehebung
