Electrical Installation; Energy Efficiency - ZANKER KOU65962XK Benutzerinformation

Securing the appliance to the cabinet

Electrical installation

The manufacturer is not responsible if
you do not follow the safety precautions
from the Safety chapters.
This appliance is supplied without a main plug and a
main cable.
Cable
Cable types applicable for installation or replacement:
H07 RN-F, H05 RN-F, H05 RRF, H05 VV-F, H05 V2V2-
F (T90), H05 BB-F
For the section of the cable refer to the total power on
the rating plate.
Connecting the terminal board
The appliance has a six-pole terminal board. The
jumpers (bridges) are set for operation on a 400 V
three-phase with a neutral wire.

Energy efficiency

Product Fiche and information according to EU 65-66/2014
Supplier's name
Model identification
Energy Efficiency Index
Energy efficiency class
Energy consumption with a standard load, conventional mode
Energy consumption with a standard load, fan-forced mode
Number of cavities
A
B
1
L 1 – 2 – 3 = phase cables
N 4 = neutral cable
= earth cable
If the mains voltage is different, rearrange the jumpers
on the terminal board (refer to the connection diagram
below). Connect the ground cable to the terminal. After
you connect the supply cable to the terminal board,
attach it with a junction clamp.
3N ~
1 2 3
5 4
Zanker
KOU65962XK
95.3
A
0.93 kWh/cycle
0.81 kWh/cycle
1
1 = 45 mm
2 = 45 mm
3 = 60 mm
4 = 60 mm
= 70 mm
2 3
4
2N ~
230V ~
1 2 3 1 2 3
5 4 5 4
25