Filling The Detergent And Additives - Electrolux WASL2E 200 Benutzerinformation

42 electrolux
5. Close the door. The value 0.0 near the
symbol % on the display shows the
quantity of the detergent to use.
This data is indicative and refers to the
detergent quantity for a maximum load
that the manufacturer recommends.

FILLING THE DETERGENT AND ADDITIVES

The detergent compartment for the prewash phase and the soak programme.
Add the detergent for prewash and soak before the start of the programme.
The detergent compartment for the washing phase.
If you use a liquid detergent, put it immediately before you start the programme.
Liquid additives compartment (fabric conditioner, starch).
Put the product in the compartment before you start the programme.
This is the maximum level for the quantity of liquid additives.
The compartment for the stain remover.
Put the product in the compartment and set the stain function before you start
the programme.
Flap for powder or liquid detergent
Turn it (up or down) in the correct position to use powder or liquid detergent.
Always obey the instructions that you find on the packaging of the detergent products.
Caution! Make sure that no laundry
stays between the seal and the door.
There is a risk of water leakage or
damage to the laundry.