Filling The Detergent And Additives - Electrolux EWC1350 Benutzerinformation

10.2 Filling the detergent and additives

When you set a programme with prewash, put the detergent for
prewashing phase directly into the drum.
Always follow the instructions that you find on the packaging of the
detergent products, but we recommend that you do not exceed the
maximum indicated level (
best washing results.
After a washing cycle, if necessary, remove any detergent residue from
the detergent dispenser.
10.3 Select the required
programme by means of the
programme selector dial
Turn the programme selector dial to the
required programme. The selector can
be turned either clockwise or
anticlockwise. The green light of button
Start/Pause - Départ/Pause
flash. The pilot lights corresponding to all
phases composing the selected
programme are on.
On position the programme is reset
and the machine is switched OFF.
At the end of the programme the selector
dial must be turned to position
switch the machine off.
). This quantity will however guarantee the
starts to
10.4 Select the spin speed,
rinse hold or no spin option
Select the spin speed, Rinse Hold option
or No Spin option by turning the spin
speed selector.
to
• The position 1300 rpm for Cotton is
equivalent to 900 rpm for the
Synthetic and Wool programmes and
700 rpm for the Delicate wash
programme.
Rinse Hold
Compartment for powder or liq‐
uid detergent used for main
wash. If using liquid detergent,
pour it just before starting the
programme.
Compartment for liquid additives
(fabric conditioner, starch).
Any fabric softener or starching
additives must be poured into the
compartment before starting the
wash programme.
Maximum level for quantity of liq‐
uid additives.
If you turn the programme
selector dial to another
programme when the
machine is working, the
lights in the programme
progress display will start to
flash to indicate a wrong
selection. The machine will
not perform the new
selected programme.
ENGLISH 17