Lenord + Bauer
2.4
Product identifier
Along with the identification of the manufacturer, there are the following
markings on the product:
1
Product identifier (as per type code in the Technical information document)
2
Serial number (yywwpppppp; y: year of manufacture, w: calendar week,
p: unique production number)
2.5
Manufacturer's declaration
You will find the manufacturer's declaration as per the EMC Directive 2014/30/EU in
the internet at www.lenord.com.
2.6
Interface information GEL 2449M
2.6.1
Description
The MiniCODER GEL 2449M is an incremental rotary encoder with reference signal.
It transmits data via a digital serial interface (Mitsubishi High Speed Serial Interface).
Data is only transmitted upon request. The MiniCODER decodes requests (RQ+/
RQ-) received from a control system and then sends the data requested (Data+/
Data-) to the control system.
2.6.2
Application possibilities
The MiniCODER can be connected directly to Mitsubishi CNC series M800/M80/E80/
C80.
Application possibilities M800/M80/E80/C80
Spindle drive
Models
● MDS-E-SP series
● MDS-EH-SP series
● MDS-EJ-SP series
● MDS-EM-SP series
● MDS-EMH-SP series
Firmware number: BND-1501W202
Firmware version: B2 or later
GEL 2449
Product identifier
1
2
Servo drive
Models
●
MDS-E-Vx series
●
MDS-EH-Vx series
●
MDS-EJ-Vx series
●
MDS-EHG-Vx series
●
MDS-EM-Vx series
●
MDS-EMH-Vx series
Firmware number: BND-1501W201
Firmware version: B2 or later
2 Description
39