Lenord + Bauer
3
Product identification
3.1
Scope of supply
The product is supplied in a cardboard box with foam insert. Included are:
●
Tower oscillation monitor
●
Technical descriptions and device description file on CD-ROM
Accessories
●
Relay output mating connector
●
Fieldbus cables of varying lengths and fieldbus mating connector
3.2
Rating plate
Type and serial number for the device are noted on the label plate on the front of the
device (→ section
3.3.1
A Y number after the product identifier – e. g. GEL 3011Y001 – identifies a cus-
tomer-specific version that may vary from the standard technical specification.
Then the additional documentation supplied has priority.
3.3
Parts named
3.3.1
Overview
The following view applies for the CANopen variant of the device.
1
2
3
4
1
Mounting plate
2
Tower oscillation monitor housing
3
Relay outputs connection (M12, 8 male)
4
Label and rating plate
Type: Type information as per order code (→ Technical information document)
Serial: Serial number, composed of (from the left) 2 places for the year of production (e.g.
14 ≙ 2014), 2 places for the week no. and 6 places with the current production number
(uniquely assigned by production control)
5
LED displays for branch 1 (DIAG1) and branch 2 (DIAG2)
6
Bus connector M12, input (male); supply voltage feed
7
Bus connector M12, output (female)
If not used, seal using blanking plugs or bus terminating resistor.
GEL 3011
Scope of supply
point 4).
3 Product identification
5
6
7
31