Dialling Using The Direct Dial Buttons; Dialling Using The Speed Dial Buttons; Dialling Telephone Numbers When Using On Private Exchanges - AUDIOLINE TEL4 CLIP Bedienungsanleitung

Note:
The memories M1, M2 and M3 correspond to the speed dial buttons 01,
02 und 03.
The numbers stored can be recorded on the index underneath the receiver.
For this purpose, the cover can be removed with a pointed object.
4.7.3

Dialling using the direct dial buttons

1. Lift the receiver.
2. Press the required direct dial button M1, M2 or M3.
3. The stored number will now be dialled.
4.7.4

Dialling using the speed dial buttons

1. Lift the receiver and
2. Press the speed dial button
04 to 18.
3. The stored number will now be dialled.
4.8 Dialling telephone numbers when using on private
exchanges
With private exchanges, it is necessary to dial a certain number (e.g. "9" or
"0") in order to obtain a dialling tone for an outside line on the extension. With
some, older private exchanges, it takes some time before the dialling tone can
be heard.
Especially for these private exchanges, an automatic pause can be inserted
after connecting to the outside line so that you can dial directly without waiting
for the dialling tone.
Press the button once between the number for the outside line and the
actual telephone number. The pause will be shown by a "P" in the display.
After connecting to an outside line your telephone will wait for three seconds
before dialling the actual telephone number.
- Operation -
and the required storage location from
31