Storing Direct And Speed Dial Numbers; Dialling Using The Direct Dial Buttons; Dialling Using The Speed Dial Buttons - AUDIOLINE TEL 48 Extra Plus Bedienungsanleitung

3.8

STORING DIRECT AND SPEED DIAL NUMBERS

You can store a telephone number for direct dialling on each of the buttons
M1, M2 and M3 with your AUDIOLINE Telephone 48 Extra Plus. The direct
dial button M3 is coloured red and is thus suitable for use as an emergency
call button. An additional ten numbers can be stored as speed dial
numbers.
PLEASE FOLLOW THE INSTRUCTIONS:
Lift the receiver.
Press the store button c.
Now enter the required telephone number using the number pad.
The maximum length is 16 digits.
Press the store button c again.
Now press the required direct dial button M1, M2 or M3 or a button
on the number pad between 1 to 9 or 0 to save the telephone
number as a speed dial number.
Replace the receiver.
Storage locations already used are automatically overwritten when you
store a new telephone number in this location.
The numbers stored can be recorded on the index underneath the receiver.
Press down firmly on the cover, slide it downwards and remove the note.
Write down the phone number. Replace the note and cover.
3.8.1

DIALLING USING THE DIRECT DIAL BUTTONS

PLEASE FOLLOW THE INSTRUCTIONS:
Lift the receiver and press the required direct dial button M1, M2 or
M3.
3.8.2

DIALLING USING THE SPEED DIAL BUTTONS

PLEASE FOLLOW THE INSTRUCTIONS:
Lift the receiver and press the speed dial button e and the re-
quired storage location from 1 to 9 or 0.
− OPERATION −
25