Operation; Dialling A Number; Dialling Using The Number Buttons; Dialling Using The Redial Facility - AUDIOLINE TERMINAL 2 Bedienungsanleitung

4

Operation

4.1

Dialling a number

The AUDIOLINE TERMINAL 2 can be used like any conventional telephone and, in addition,
has some useful special features, which make phoning considerably easier for you. You have
various ways of making a call:
4.1.1

Dialling using the number buttons

1. Enter the phone number using the number buttons. The phone number will be shown in
the display.
2. Lift the receiver or press the handsfree button
3. While the call is being made, the display will show the duration of the call.
4. To end the call, replace the receiver or press the handsfree button
4.1.2

Dialling using the redial facility

The redial button automatically stores the last three telephone numbers dialled.
1. Press the
in the display.
2. Press the handsfree button
be dialled automatically.
3. If you do not wish to dial a number, you can exit this function with the MENUE button.
4.1.3

Dialling using the direct dial buttons

Simply press the required direct dial button 1 to 10 and the stored telephone number will be
dialled immediately using the handsfree facility. The display will either show the telephone
number or the stored name. Lift the receiver if you do not want to make a call using the
handsfree facility.
4.1.4

Dialling from the phone book

1. Press the
2. Now enter the storage location as a two-digit number between 11 and 50. The direct dial
buttons can also be dialled as numbers 1 to 10.
3. The display will either show the telephone number or the stored name and the telephone
number will be dialled directly.
4. Lift the receiver if you do not want to make a call using the handsfree facility.
4.1.5

Finding a number in the phone book

42
- Operation -
button as often as necessary until you see the required telephone number
or lift the telephone receiver and the phone number will
button. The display will show "Location >> 1-50".
.
.