5.2
Dialling a telephone number directly from the Caller List
You can dial telephone numbers directly from the caller list.
1. Lift the receiver and select the required telephone number using the
buttons.
2. Now press the
Or
1. With the receiver hung up on base select the required telephone number
using the
2. Now press the
be dialled directly
Note!
Before dialling, your telephone compares the country and local dialling codes
of the number dialled with your location (local dialling code). If you have
entered your local dialling code during installation, the appropriate numbers
will not be dialled if this is a number from within your local network.
5.3
Deleting numbers from the caller list
1. Select the telephone number that you want to delete from the caller list
using the
2. Now press the
5.4
Deleting the entire caller list
1. Select one telephone number from the caller list using the
2. Press the
"KEIN ANRUF (NO CALLS)" and the entire caller list will be deleted.
34
- Caller Display (CLID) -
button and the telephone number will be dialled directly.
buttons.
button and lift the receiver. The telephone number will
buttons.
button twice and the number will be deleted.
button for 3 seconds. The display will show the message
buttons.