Basic Settings - AUDIOLINE TEL4 CLIP Bedienungsanleitung

3.7

Basic settings

Before you can use your telephone, a few basic settings have to be made.
These include entering the current date and time as well as your local dialling
code and the country dialling code for Germany.
Some notes on the local dialling code and the country code
Telephone numbers are always shown in the display with the local dialling
code or, in the case of international calls, also with the appropriate country
code. If these numbers are dialled directly from the caller list, the dialling code
can of course be omitted with local calls. Therefore, you should enter your
local dialling code (always starting with the 0) and the country code for
Germany (0049).
After the batteries have been fitted, the display shows the message
ORTSVORWAHL and the cursor will flash in the first position.
Note: If the message ORTSVORWAHL no longer appears or if you have to
change the time from winter to summer time, press the buttons
seconds.
1. You can enter the local dialling code as soon as the cursor flashes in the
first position. At a short dialling code press the
until the display shows the message LANDESVORWAHL.
2. Now enter the whole of the country code for Germany "0049". Confirm
with the
3. Enter the current hour by repeatedly pressing the
4. Confirm with the
5. Enter the current minutes by repeatedly pressing the
6. Confirm with the
7. Enter the current day by repeatedly pressing the
8. Confirm with the
9. Enter the current month by repeatedly pressing the
10. Confirm with the
data will now be shown in the display.
If the batteries are fully discharged, the time and date must be re-entered.
- Setting up -
button. The display now jumps to the time entry.
button. The display jumps to the minutes display.
button. The cursor jumps to the day display.
button. The cursor jumps to the month display.
button. This completes the entries and the current
for 4
button several times
buttons.
buttons.
buttons.
buttons.
27