Assigning The Three Direct Dial Buttons; Using The Direct Dial Buttons; Checking The Stored Direct Dial Buttons - AUDIOLINE Porty Bedienungsanleitung

4.9

Assigning the three direct dial buttons

Your telephone has three direct dial buttons, M1, M2 and M3. The
maximum length for a number is 20 characters.
1. Hold the required direct dial button pressed for 5 seconds. The
display shows the message NR EINGABE (ENTER NO).
2. Enter the required telephone number using the number pad.
Incorrect entries can be deleted with the
3. Now press the required direct dial button again and the number will
be stored. The display will briefly show the message M1, M2 or M3
GESPEIC (STORED).
4.10

Using the direct dial buttons

When you have assigned telephone numbers to the three direct dial
buttons, you can dial the three numbers easily.
Simply press the required direct dial button M1, M2 or M3 and the
number will be dialled directly. The last 10 digits of the number will be
shown in the display during the dialling process.
4.11

Checking the stored direct dial buttons

When you have assigned telephone numbers to the three direct dial
buttons, you can check which numbers you have stored at any time.
1. Press the
appears.
2. Now select the required direct dial button by pressing the number
and the stored telephone number will be shown in the display for a
few seconds.
1 = M1
- Operation -
button four times until the message ANS MEM
2 = M2
button.
3 = M3
29