Remote Access - AUDIOLINE Sprint 183 Bedienungsanleitung

10.11
Remote access enables the answering machine to be contacted from
any telephone which uses tone dialling in order to listen to messages
received and execute other functions.
10.11.1
The answering machine is provided with a personal identification number
so only you can listen to incoming messages via the remote access
feature. The default security code set at the factory is 000".
10.11.2
Proceed as follows to change the security code:
2 sec B
z oder y, B
z oder y, B
z oder y, B
10.11.3
©
¹ Button *, ©
Button 2
Replace receiver
68
Downloaded from www.Manualslib.com
− Telephone Answering Machine −

Remote access

Remote access security code
Changing the remote access security code
Playing back messages via remote access
If an incorrect entry is made, the outgoing message is
repeated. If the security code is entered incorrectly three times,
the line is automatically disconnected.
Other functions can be executed via the remote access
system within the following 8 seconds.
manuals search engine
Press button
Change 1st digit and confirm
Change 2nd digit and confirm
Change 3rd digit and confirm
Dial your own phone number
Press during the outgoing message and
enter the PIN code
Play back message
End remote access