Adjusting The Seat Height And Seat Angle - Vermeiren Eclips X4 kids 90 Gebrauchsanweisung

3.3

Adjusting the seat height and seat angle

L
WARNING:
Risk of injury - Make sure that all screws are properly tightened with
the appropriate tool.
L
WARNING:
Risk of tipping over - When the driving wheels are adjusted, the
position of the wheels are altered.
The Vermeiren Eclips X4 kids 90° is adjustable in different seat heights and different seat
angles by changing the wheels position. At each height there is a different setting of the front
and rear wheels.
Minimum seat height: 420 mm
Minimum seat angle: 0°
Change the seat height and seat angle according following steps:
* Front wheel:
Maximum seat height: 470 mm
Maximum seat angle: 6,5°
1. Loosen the screws Ⓐ from the steering wheel
adapter Ⓑ.
2. Choose correct size for the adapter Ⓑ and fork.
3. Place the steering wheel adapter in the desired
position (2 different positions: steps from 34
mm).
4. Tighten the screws Ⓐ properly.
or
5. Loosen the screw Ⓓ from the front fork Ⓔ.
6. Choose the correct position. Do not use the
holes  and . (3 different positions: steps
from 12 mm).
7. Tighten the screws Ⓓ properly.
Page 13
Eclips X4 kids 90°
2014-08