Installation And Adjustment; Tools; Manner Of Delivery; Adjusting The Seat Height And Seat Angle - Vermeiren V300 Gebrauchsanweisung

EN
3

Installation and adjustment

The instructions in this chapter are for the specialist dealer.
The Vermeiren V300 has been designed to be adjust with a minimum of replacements parts.
There is no need for extra stock of spare parts.
To find a service facility or specialist dealer near you, contact the nearest Vermeiren facility.
A list of Vermeiren facilities can be found on the last page.
L
WARNING:
manual.
L
WARNING:
wheelchair (tilt back or sideways).
3.1

Tools

Wrench set n° 7 to n° 22
Allen keyset n° 3 to n° 8
Screwdriver n° 4 to n° 5
Screwdriver Phillips head
3.2

Manner of delivery

The Vermeiren V300 shall be delivered with:
1 frame with arm supports, rear and front wheels (standard delivery
seat height: 500 mm (19.69 in.), seat angle: 5°)
1 pair footrests
Tools
Manual
Accessories
3.3

Adjusting the seat height and seat angle

The Vermeiren V300 is adjustable in 4 seat heights and 5 seat angles (0°-2,5°-5°-10°) by
changing the position of the wheels for each height and angle there is a different setting of
the front and rear wheels.
The summary of the different seat heights by a standard seat angle 5° is tabulated below.
Seat height
440 mm (17.32 in.)
470 mm (18.50 in.)
500 mm (19.69 in.)
(Standard)
530 mm (20.87 in.)
Risk of unsafe settings - Use only the settings described in this
Variation of allowed adjustments van still change the stability of your

Rear wheels

Hole




Table 2: Seat heights by seat angle 5°
Front wheels
Hole
Bushing
stem housing




Page 16
V300
2010-11
Ⓑ
relative to castor
Ⓒ
Above
Under
Under
Under