3
The instructions in this chapter are for the specialist dealer.
The Vermeiren V300DL has been designed to be adjust with a minimum of replacements
parts. There is no need for extra stock of spare parts.
To find a service facility or specialist dealer near you, contact the nearest Vermeiren facility.
A list of Vermeiren facilities can be found on the last page.
L
WARNING:
manual.
L
WARNING:
wheelchair (tilt back or sideways).
3.1
To set up the wheelchair the following tools are needed.
3.2
The Vermeiren V300DL shall be delivered with:
3.3
The Vermeiren V300DL is adjustable in 4 seat heights and 5 seat angles (0°-2,5°-5°-7,5°-
10°) by changing the position of the wheels for each height and angle there is a different
setting of the front and rear wheels.
The summary of the different seat heights by a standard seat angle 5° is tabulated below.
(without seat cushion)
500 mm (Standard)
Downloaded from
www.Manualslib.com
Installation and adjustment
Risk of unsafe settings - Use only the settings described in this
Variation of allowed adjustments can still change the stability of your
Tools
Wrench set n° 10 to n° 22
Allen keyset n° 4 to n° 6
Manner of delivery
1 frame with armrests, rear and front wheels (standard delivery
seat height: 500 mm without seat cushion, seat angle: 5°)
Seat cushion
Anti-tipping (only right side)
1 pair footrests
Tools
Manual
Accessories
Adjusting the seat height and seat angle
Seat height
Rear wheels
440 mm
470 mm
530 mm
Table 2: Seat heights by seat angle 5°
manuals search engine
Hole
Hole
Bushing
Page 18
V300DL
2016-03
Front wheels
Ⓑ
relative to castor
Ⓒ
stem housing
Above
Under
Under
Under