Installation And Adjustment; Tools; Manner Of Delivery; Adjusting The Seat Height And Seat Angle - Vermeiren V300 XL Gebrauchsanweisung

3

Installation and adjustment

The instructions in this chapter are for the specialist dealer.
The Vermeiren V300 XL has been designed to be adjust with a minimum of replacements
parts. There is no need for extra stock of spare parts.
To find a service facility or specialist dealer near you, contact the nearest Vermeiren facility.
A list of Vermeiren facilities can be found on the last page.
L L L L
WARNING:
Risk of unsafe settings - Use only the settings described in this
manual.
L L L L
WARNING:
Variation of allowed adjustments van still change the stability of your
wheelchair (tilt back or sideways).
3.1

Tools

•
Wrench set n° 7 to n° 22
•
Allen keyset n° 3 to n° 8
•
Screwdriver n° 4 to n° 5
•
Screwdriver Phillips head
3.2

Manner of delivery

The Vermeiren V300 XL shall be delivered with:
•
1 frame with armrests, rear and front wheels (standard delivery
seat height: 500 mm, seat angle: 5° )
•
1 pair footrests
•
Tools
•
Manual
•
Accessories
3.3

Adjusting the seat height and seat angle

The Vermeiren V300 XL is adjustable in 4 seat heights and 5 seat angles (0° -2,5° -5° -7,5° -
10° ) by changing the position of the wheels for eac h height and angle there is a different
setting of the front and rear wheels.
The summary of the different seat heights by a standard seat angle 5° is tabulated below.
Seat height
440 mm
470 mm
500 mm
(Standard)
530 mm

Rear wheels

Hole Hole
Table 2: Seat heights by seat angle 5°
Page 14
Front wheels
Ⓑ Ⓑ Ⓑ Ⓑ
Bushing relative to castor
stem housing
Above
Under
Under
Under
V300 XL
2013-11
Ⓒ Ⓒ Ⓒ Ⓒ