Anatomical Seat; Adjusting Seat Depth - Vermeiren Eclips X4 kids 90 Gebrauchsanweisung

Some of the wheelchairs Eclips X4 kids Aktief are made with an adjustable axle adjuster.
With these adjuster you can also change the seat height.
1
3.4

Anatomical seat

3.5

Adjusting seat depth

L
WARNING:
Risk of injury - Make sure that all screws are properly tightened
before using the wheelchair.
The seat depth can be adjusted from 310 mm to 370 mm in steps from 20 mm for seat width
320 mm and from 330 mm to 390 mm in steps from 20 mm for seat width 370 mm.
1. Remove the screws  and .
2. Push/Pull the adjustable axle adjuster 
upwards or downwards to the required
height.
2
3. Retighten the screws  and .
3
If you have opted for an anatomical padded seat, place it on
the tubular cross-hinge so that the seat's supports engage
equally with the cross-hinge. In the wooden base you will find
slots that are placed in the hinge's cross-pieces. To fold up the
wheelchair, remove the seat by pulling it upwards.
Page 15
Eclips X4 kids 90°
Adjust the seat depth according
following procedure:
1. Remove the armrests,
footrests and rear wheels.
2. Loosen the screws .
3. Loosen the screws .
4. Remove the crosses from the
seat located on the main
frame  by folding the
wheelchair.
5. Remove the screws 
located in the blocks for the
cross  on the main
frame .
2014-08