SPORTSTECH PT300 Benutzerhandbuch Seite 29

STEP 8:
STEP 9:
Attach left and right upper brackets (15) to the
pull up bar (18) with M8x40 screws + washers.
Insert the Plastic Nut on the screws.
Insert the upper bracket (15) into the vertical sup-
port (5), select the desired height (3 positions)
and lock it with M10x65 knob screw (14).
Attach the leg support (36) to the upper traver-
se (33) with M10x45 screw + flat washers (both
side, 1 x big & 1 x small) + nuts.
29