Explanation Of Symbols; Safety And Installation Instructions - Dometic PERFECTVIEW CAM45 Montage- Und Bedienungsanleitung

Explanation of symbols

1 Explanation of symbols
!
WARNING!
Safety instruction: Failure to observe this instruction can cause fatal or serious injury.
!
CAUTION!
Safety instruction: Failure to observe this instruction can lead to injury.
A
NOTICE!
Failure to observe this instruction can cause material damage and impair the function
of the product.
I
NOTE
Supplementary information for operating the product.
2

Safety and installation instructions

Please observe the prescribed safety instructions and stipulations from the vehicle
manufacturer and service workshops.
The manufacturer accepts no liability for damage in the following cases:
•
Faulty assembly or connection
•
Damage to the product resulting from mechanical influences and excess voltage
•
Alterations to the product without express permission from the manufacturer
•
Use for purposes other than those described in the operating manual
Please note the following:
•
To prevent the risk of short circuits, always disconnect the negative terminal of the vehicle's
electrical system before working on it.
If the vehicle has an additional battery, its negative terminal should also be disconnected.
•
Inadequate supply cable connections could result in short circuits, causing:
– Cable fires
– The airbag being triggered
– Damage to electronic control equipment
– Electrical malfunctions (indicators, brake light, horn, ignition, lights)
•
When working on the following cables, only use insulated cable terminals, plugs and flat
sockets:
– 30 (direct supply from positive battery terminal)
– 15 (connected positive terminal, behind the battery)
– 31 (return cable from the battery, earth)
– 58 (reversing light)
Do not use porcelain wire connectors.
10
CAM45
EN