Intended Use - RADEMACHER RolloTron Montage- Und Bedienungsanleitung

3.1 Intended use

Only use the RolloTron DECT for opening and closing roller
shutters with a permissible belt.
i
Mechanical locks of any kind are not suitable for
automated operation with this device.
Only use original spare parts from RADEMACHER
By doing so, you avoid the risk of malfunctions and damage
●
to your RolloTron DECT.
As the manufacturer, we provide no warranty for the use of
●
third-party components and accept no liability for conse-
quential damage resulting from such.
All repairs to the RolloTron DECT must be undertaken by
●
authorised customer service personnel.
Operating conditions
A 230 V / 50 Hz power supply, together with a site-provided
●
disconnecting device (fuse, MCB), must be available at the
installation location.
An easily accessible 230 V / 50 Hz socket must be available
●
if the enclosed connecting cable with Euro plug is being
used.
The roller shutter must run up and down smoothly. It
●
should not jam.
The mounting surface for the RolloTron DECT must be flat.
●
i Radio systems that transmit on the same frequency
can cause interference.
Dangers in the case of improper use
Using the RolloTron DECT for purposes other than previously
mentioned is impermissible.
46