Technical Data - Metz mecastudio TL-300 Bedienungsanleitung

13 Technical data

Flash output (controllable from P1/1 to P1/32):
TL 300: 300 Ws
TL 600: 600 Ws
GN (ISO 100):
TL 300: 80
TL 600: 100
Guiding shield:
TL 300: 64
TL 600: 81
Flash tube:
Plug-in, can be replaced by user
Synch voltage for triggering a flash: 4,5 V
Flash triggering via:
internal photocell, synch cable,
Recharging time of the studio flash unit:
TL 300: 0,4 - 1,2 s
TL 600: 0,5 - 1,5 s
Flash durations:
TL 300: 1/150 (P1) - 1/1200 (P1/32)
TL 600: 1/130 (P1) - 1/850 (P1/32)
Colour temperature: 5600 K ± 200 K
Output of the modelling lamp:
TL300: 0 - 150W
TL600: 0 - 250W
Warning tone if studio flash unit overheats: Yes
Digital display: Yes
Power supply:
90-250 V ~ / 50/60 Hz
Miniature fuse: T8AL/250V
button
Protection category: IP 20
Dimensions in mm (W x H x D) without reflector:
132 x 218 x 375
Weight (incl. protective cap and flash tube):
TL 300: 2450 g
TL 600: 2865 g
Permissible operating conditions:
-10 °C bis + 40 °C
Storage conditions:
Dry and dust-free in the original packaging from -20 °C bis +50 °C
Scope of delivery:
1 TL300 / TL600 studio flash unit with
protective cap
1 Reflector SR-18 (not in kit)
1 Modelling lamp TL-300 150W/TL-600 250W
1 Synchronisation cable 4.5W (4m)
1 Power cord (4m)
k
95