Touch Display Settings; Screen Display Duration (Bl Auto Off); Brightness - Metz mecastudio TL-300 Bedienungsanleitung

+
If the tone is switched off, then a switched
on modelling lamp goes off automatically
after a flash until the next time the flash is
ready.

6.4 Touch display settings

6.4.1 Screen display duration
(BL Auto off)
The screen can be configured so that it is
illuminated after a change has been made
for a period of 30 or 120 seconds or
permanently.
Setting procedure
• Press the button
• Press the
display.
• Press the
touch display and select
• Press on the touch display and select the
BL Auto off

Brightness

settings menu.
Contrast
• Press the sensor button
Rotation
touch display and then select 30 seconds,
120 seconds or "Bl on".
30 S
The setting is adopted immediately
120 S
Bl on
D
and open the menu.
sensor button on the touch
sensor buttons on the
BL Auto off
.
on the
6.4.2 Brightness
The screen brightness can be changed to one
of nine different levels.
Setting procedure
• Press the button
• Press the
display.
• Press the
touch display and select
BL Auto off • Press on the touch display and select the
Brightness
settings menu.
Contrast
• Press the sensor buttons
Rotation
touch display and select the desired
brightness between 1and 9.
The setting is adopted immediately
Brightness
4
D
and open the menu.
sensor button on the touch
sensor buttons on the
Brightness
.
on the
85
k