Safety-Related Information On Taking Out Of Operation And Removal; Liability And Exclusion Of Liability - Elektror HRD 1T FU Montageanleitung

www.elektror.com
6 SAFETY RELATED INFORMATION
ON TAKING OUT OF OPERATION AND
REMOVAL
The disconnecting of all electrical connections and all oth-
er electrical engineering work in connection with taking the
blower out of operation must be referred to a qualifi ed electri-
cian.
The blower may only be dismantled after all rotating parts
have come to a standstill and a safeguard has been provided
to prevent restarting.
Dismantling and removal must be performed in accordance
with the guidelines set out in section 2.1, Transportation and
handling.
Dispose of in the appropriate manner.
Operating and assembly instructions HRD FU-ATEX
7 LIABILITY AND EXCLUSION OF LI-
ABILITY
The owner bears responsibility for the designated use of the
unit.
Elektror shall not be liable in any case of damage resulting
from non-designated use of its units and components.
This also applies, in particular, to special usages and
application conditions, which have not been expressly co-
ordinated with Elektror.
Furthermore, Elektror shall not be liable for damage result-
ing from modifi cations or conversions to the delivered
equipment or accessories, in particular, if such changes can
impair the explosion protection.
Similarly, Elektror shall assume no liability for maintenance
work and repairs, and the possible consequences thereof,
that have been performed incorrectly, with delay, by techni-
cians not qualifi ed by Elektror, or which have not been
carried out at all.
EN
19