Kärcher WPD 100 Advanced Originalbetriebsanleitung Seite 22

If the option "Portion customizing Adapted" is activated
in the user settings, you can choose between 1, 2 or 3
adjustable portionings after selection of the water type
(settings see Chapter "Care and maintenance / user
menu / operating parameters").
1 CO selection "classic"
2
2 CO selection "medium"
2
3 Symbol button "STOP"
(With WPD 200 and WPD 600 with CO
If the option "CO customizing Classic / Medium" is ac-
2
tivated in the user settings, you can choose between the
variants "Classic" and "Medium" with different CO
tent after selecting carbonated water (see Chapter
"Care and maintenance / user menu / operating param-
eters").
1 Display "Extra hot"
2 Display "Hot"
3 Symbol button "STOP"
(Only in devices with hot water function)
If the option "Extra hot" is activated in the user settings,
you can choose between between the variants "Hot"
and "Extra hot" after selection of hot water (settings see
Chapter "Care and maintenance / user menu / operat-
ing parameters").
1 Display "Heating"
2 Display "Ready"
Note:
For safety reasons the "Portion customizing" option is
not available for dispensing hot water.
In order to remove hot water, briefly push the button for
hot water once. The heating process is plotted on the
display. As soon as the pre-set water temperature is
reached, push the button for hot water and hold it down
until the desired water quantity has been dispensed.
After every heating process 0.5 l of hot water are avail-
able. The dispensing stops after max. 0.8 l. If more hot
water is required, repeat the procedure.
Shutdown
If the appliance will not be needed for more than 4 days:
 Shut off water supply.
 Set the appliance switch to "0".
22
Startup after shutdown
WARNING
Health risk due to increased micro-organism concentra-
tion in the water.
If the appliance has not been not used for more than 4
days, the following actions must be taken:
 Set the appliance switch to "I".
 Check the time and date, reset if necessary (see
"Care and maintenance/user menu/operating pa-
rameters").
 Open the water supply.
 Start hygienisation manually in the user menu (see
Chapter "Care and maintenance/user menu/main-
tenance").
CAUTION
Consider the weight of the appliance when storing it.
Prior to restarting after storage:
 Uninstall filters that are inserted in the device and
replace them with new filters.
 Perform hygienisation.
-Option only)
2
con-
2
Storage
5
-
EN