Adjusting The Focal Length; Control Menu Introduction; Camera-S; Menu Setting Introduction - YUNEEC PROACTION CGO4 Bedienungsanleitung

When CGO4 gimbal camera is in Manual Exposure Mode: the photographer can determine
First, tap Mode button on the lower portion of the screen and a virtual mode dial will pop up
on the screen and then set the mode dial to [M].Slide the aperture value picker and shutter
speed picker to set the appropriate aperture value and shutter speed.

ADJUSTING THE FOCAL LENGTH

Use this function when you want to fix the focus or when the distance between the lens and
the subject is determined and you do not want to achieve Auto Focus.
Angle of view
Focal Length

CONTROL MENU INTRODUCTION

FIXING THE FOCUS AND THE EXPOSURE (AF/AE LOCK)
This is useful when you want to take a picture of a subject outside the AF area or the contrast
is too strong and you cannot achieve appropriate exposure.
[AE LOCK] Only the exposure is locked. When the exposure is set, [AEL],the aperture value,
the shutter speed are displayed.
[AF LOCK] Only the focus is locked. When the subject is focused,[AFL],the focus indication,
the aperture value and the shutter speed are displayed.
[AF/AE LOCK] Both focus and exposure are locked. [AFL],[AEL],the focus indication, aperture
value and shutter speed are displayed when the focus and the exposure are optimized.
[AF-ON] Auto Focus is performed.

CAMERA-S

This allows you to switch on/off the camera when operating CGO4 on ProAction™ .
STEP 1: Tap [ ] icon on the right-hand column and tap "Camera-S"
STEP 2: A camera setting bar will pop up on the screen.
STEP 3: Slide the Camera ON/OFF switch to the right to turn on the camera.
STEP 4: Slide the Camera ON/OFF switch to the left to turn off the camera.
GUIDELINESS:
When there are obstacles, the position judgment of the photographer may be biased. The
guidelines function can help to correct their judgment in the horizontal and vertical direction
and to create a better photo composition.
STEP 1: Tap [ ] icon on the right-hand column and tap "Guidelines".
STEP 2: A guideline status menu will pop up on the screen.
STEP 3: Slide the guideline switch to the right to turn on the camera.
STEP 4: Slide the guideline switch to the left to turn off the camera.

MENU SETTING INTRODUCTION

VIDEO SYSTEM
This allows you to set different system frequency. In different system frequencies, the video
qualities are different.
NTSC 4K/100M/30P; FHD/28M/60P; FHD/20M/30P; HD/10M/30P; VGA/4M/30P
PAL 4K/100M/25P; FHD/28M/50P; FHD/20M/25P; HD/10M/25P; VGA/4M/25P
CINEMA C4K/100M/24P; 4K/100M/24P; FHD/ALL-intra/200M/24P; FHD/50M/24P
Wide(f=14mm:75°~Tele(f=42mm:29°
F=14mm-42mm
21