Safety Precautions; Overview - YUNEEC PROACTION CGO4 Bedienungsanleitung

SAFETY PRECAUTIONS

PROACTION
Do not touch or move the ProAction™ within about 12s until the initialization is completed.
Do not operate the ProAction™ in the rain!
Do not expose the ProAction™ to fire sources!
The ProAction™ can't be operated after the second level low voltage battery warning！
CGO4
Do not expose the CGO4 gimbal camera to water, including rain and moisture.
Do not expose the lens of the CGO4 gimbal camera to excessive light sources.
Do not operate the CGO4 gimbal camera in environments with extremely high or low
temperatures and high humidity.
Do not press the lens with excessive force.
Do not leave the camera with the lens facing the sun as rays of light from the sun may cause
it to malfunction. Also, be careful when placing the camera outside or near a window.
Do not try to repair the CGO4 gimbal camera by yourself.
Do not attempt to operate CGO4 gimbal camera in areas with potential magnetic and/or
radio interference including areas nearby broadcast towers, power transmission stations, high
voltage power lines, etc.
Do not operate the Gimbal in the rain!
Do not expose the Gimbal to fire sources!
Do not touch or move the Gimbal until the initialization process has been completed.
In need of repair, send the CGO4 gimbal camera to an authorized service center.

OVERVIEW

01 Power/Mode Selection Switch
02 Battery Indicator
03 CGO4 Gimbal
04 Phone Holder
05 Control Status Indicator
06 Pitch Control Wheel
07 Function Switch Button
08 ProAction™ Hand Holder
09 Gimbal Control Stick
10 CGO4 Camera LED Indicator
11 T Card Upgrade Port
12 CGO4 Camera Lens
13 CGO4 5.8G Antenna
14 Fix Foam Pad ( 2 pieces )
IMPORTANT NOTE: Remove the fixed foam pad from the CGO4 gimbal camera before
proceeding. Reinstore the fixed foam pad to the CGO4 gimbal camera after using.
01
02
03
10
12
13
3
04
05
06
07
08
09
11