Cgo4 Interface(St24); Photo Taking And Video Recording - YUNEEC PROACTION CGO4 Bedienungsanleitung

CGO4 INTERFACE (ST24)
Model: H920 CGO4
MODE
STD
N/A
4K 30
GPS
N/A
SAT
N/A
POS
N/A E
N/A N
zoom
0mm
00:00:00
01
01. ZOOM IN / OUT
05. EXPOSURE VALUE

PHOTO TAKING AND VIDEO RECORDING

ST24 seamlessly integrates control of CGO4 gimbal camera so that you can easily take still
photos and start/stop video recording through corresponding buttons.
CAUTION: If CGO4 is carried on H920, it can only be controlled through ST24. Phone App is disabled.
TO TAKE PHOTOS
Press the button located on the left side of ST24. You'll hear an audible 'shutter' sound from
ST24 and it will take approximately 5 seconds to capture the photo before you can take
another photo.
NOTE: You cannot take still photos during video recording.
NOTE: You must stop video-recording in order to take photos.
TO START/STOP VIDEO-RECORDING
Press the button located on the right side of ST24. You'll hear
an audible indication from ST24 each time the recording
starts/stops. And while video is recording, there will be a red
dot next to the video-recording timer near the upper
right-hand corner of ST24.
CAUTION: If the video is being recorded on ProAction™ , repress the video recording button
to end the process; otherwise, the video is unable to be saved.
WARNING: Tap the [
in case that the camera lens won't return back to the original position and can't be packaged
into the aluminum case.
Welcome, Pilot
AFS
4:3
p
P
MODE
On
WB
System Settings
02 03
02. CAMERA MODE
06. APERTURE/SHUTTER SPEED
] icon to turn off the CGO4 gimbal camera before powering off CGO4,
H
-2/3
200
ISO
Channel Settings
04 05
03. WHITE BALANCE 04. ISO SENSITIVITY
07. MENU SETTING
9
9:43:31 pm
N/A KPH
F3.5
1/60s
Model Select
06 07
(A) = To take photos
(B) = To record videos
VOLTS
N/AV
ALT
N/Am
G-SPD
DIS
N/A m