App Downloading; Attaching Cgo4 Gimbal Camera To Proaction; Binding Cgo4 Gimbal Camera To App; Gimbal Control On Proaction - YUNEEC PROACTION CGO4 Bedienungsanleitung

GROUND IMAGING SOLUTION

APP DOWNLOADING

Download the free APP named CGO4 to smart device at the APP Store or Google Play Store.
Install the APP to your 5.8GHz Wi-Fi capable device. Make a note of the network name and
password located on the top of the gimbal assembly.
CGO4 APP COMPATIBLE DEVICES:
APPLE IOS: IOS 7.0 or above
ANDROID: Android 4.2 or above

ATTACHING CGO4 GIMBAL CAMERA TO PROACTION

STEP 1: Securely attach CGO4 gimbal camera to ProAction™ with Gimbal Thumb Screws,
then withdraw the Gimbal Cord from the left side.
STEP 2: Insert the Gimbal Cord into the center carrying handle socket.
STEP 3: Install the ProAction™ Battery and engage the connector properly.
STEP 4: Erect the phone holder and install the mobile phone into it, and
then you can make Wi-Fi connection between CGO4 and mobile device by
joining the CGO4 network in your phone's Wi-Fi setting.

BINDING CGO4 GIMBAL CAMERA TO APP

The APP seamlessly integrates control of CGO4 gimbal camera so that you can see exactly
what your camera sees with a live HD video feed right on your mobile device. It makes you
feel as though the camera is right in your hands.
CAUTION: If the user wants to take photos or videos with the ProAction™ , the CGO4 APP
should be downloaded beforehand.
STEP 1: Make Wi-Fi connection between your mobile device: Select the correct Wi-Fi SSID
and enter the password: "1234567890"
STEP 2: Tap the CGO4 icon on your mobile device and enter the APP interface.

GiMBAL CONTROL ON PROACTION™

There are two modes to control the Gimbal through ProAction™ : Follow Mode and Global Mode.
Switch on the ProAction™ on a flat and stable surface. Do not move, sway or shake the
ProAction™ during initialization. After initialization, the gimbal will boot up normally in
either Follow or Global Mode, depending on user settings on the left-hand switch of the
ProAction™ . Once the gimbal is on, it begins an automatic self-check by rotating about the
yaw axis. At this time, the power indicator will be on as well. At the same time the control
status LED will blink green and blue alternately.
15