App Interface; Photo Taking And Video Recording - YUNEEC PROACTION CGO4 Bedienungsanleitung

APP INTERFACE

A
AWB
01. WHITE BALANCE 02. EXPOSURE VALUE/ISO SENSITIVITY
04. FULL SCREEN DISPLAY 05. FOCAL LENGTH 06. CONTROL MENU 07. VIDEO-RECORDING
08. BUTTONPHOTO-TAKING BUTTON 09. LEFT STORAGE 10. SETTING MENU
WARNING: Turn off the camera through APP before powering off the CGO4 camera, in
case that the camera lens won't return back to the original position and can't be packaged
into the aluminum case.

PHOTO TAKING AND VIDEO RECORDING

TO TAKE PHOTOS
STEP 1: Before you start to use the APP, you should make sure that the Wi-Fi connection
has been successfully made. Go to your Wi-Fi settings and select the CGO4 network.
STEP 2: Tap the APP icon on your mobile device and you'll come to the Camera Control Interface.
STEP 2: Press "Camera" and CGO4 gimbal camera will be ready to work.
STEP 3: Press the [
NOTICE: If you have successfully entered photo-taking, an audible 'shutter' sound will be
heard and a notice will pop up on the screen, reading "picture of success"
CAUTION: You cannot take photos while recording video. You must stop recording video in
order to take still photos.
TO START/STOP VIDEO RECORDING
Press [ ] button and you can start to record the video.
If you have successfully entered video-recording, the button will turn red and a video
recording timer will appear on the top right corner of the screen.
CAUTION: If the video is being recorded, repress the video recording button to end the
process before powering off the gimbal, or the video is unable to be saved.
AFS
4:3
4K
STD 30 p
Len: F:
EV:
01
02
03
04
] button and you can start to take photos.
YUNEEC_81004F
SS:
05
06
07
08
09
10
03. APERTURE/SHUTTER SPEED
18
16： 55： 08
5739 pic