YUNEEC PROACTION CGO4 Bedienungsanleitung Seite 54

AF MODE
This allows the focusing method that suits the positions and number of the subjects to be selected.
Focus and exposure will keep on following the subject even if it moves.
1-Area: The camera focuses on the subject in the AF area on the center of the screen.Position
and Size of the AF area can be changed.
49 point: Up to 49 AF areas can be focused.This is effective when a subject is not in the center of the
screen.You can select areas to be in focus.
Touch the eye to be in focus: touch the eye in the yellow frame. If you touch any other
location, the AF area setting screen will be displayed.
IMAGE FORMAT
CAUTION: If you delete a RAW file from the camera, the corresponding JPEG image will also be deleted.
NOTICE: It is fixed to maximum recordable pixels [L] for each image aspect ratio.
PHOTO STYLE
You can select effects to match the type of image you wish to record. You can adjust the color
and image quality of the effects.
STANDARD / VIVID / NATURAL / MONOCHROME / SCENERY / PORTRAIT
DRIVE MODE
Slide the menu and select Light Metering. A menu will pop up with three menu items:
Multiple, Center Weighted, Spot for the photographer to select with.
NORMAL When the shutter button is pressed, only one picture is recorded.
BURST Recordings are made in succession while the shutter button is pressed
Taking pictures using Burst Mode
Pictures taken with a burst speed of [SH] will be recorded as a single burst group.
Slide the Menu and Select Driving Mode. Focus on the subject and take a picture.
Changing the burst speed
Pictures taken with a burst speed of [SH] will be recorded as a single burst group.
Slide the Menu and Select Driving Mode. Focus on the subject and take a picture.
BURST SPEED(PICTURES/SECOND)
LIVE VIEW DURING BURST MODE
LIGHT METERING
The photographer can set the light metering method for still for measuring brightness.
[Multiple] This is the method in which the camera measures the most suitable exposure by
judging the allocation of brightness on the whole screen automatically. Usually, we recom-
mend using this method.
[Center Weighted] This is the method used to focus on the subject on the center of the screen
and measure the whole screen evenly.
[Spot] This is the method to measure the subject in the spot metering target.
[H] (High Speed)
12(AFS) 7(AFC)
None
23
[M] (Middle Speed)
7
Available
[L] (Low Speed)
2
Available