Bemer PRO SET Handbuch Seite 142

: : guideline and manufacturer's
declaration of conformity
electromagnetic immunity
Portable and mobile radio equipment should be used no closer to the BEMER SET CLASSIC / PRO and its power cables,
than the recommended safety distance calculated from the equation applicable to the frequency transmitter.
EMISSION TESTS
Conducted RF interference according to IEC 61000-4-6
Radiated RF interference according to IEC 61000-4-3
NOTE 1: At 80 MHz and 800 MHz, the higher the frequency range applies. NOTE 2: These guidelines may not apply in all situations.
The propagation of electromagnetic waves is affected by the absorption and reflection from structures, objects and people.
a) Field strength from fixed transmitters such as base stations for radio (cellular / wireless) telephones and land mobile radios, amateur radio, AM / FM radio stations and TV stations can not
be predicted theoretically with accuracy. To determine the electromagnetic environment of a stationary transmitter, a site survey should be considered. If the measured field strength in
the location in which the BEMER SET CLASSIC / PRO is used exceeds the conformity level listed above then the BEMER SET CLASSIC / PRO should be monitored to verify normal operation.
If abnormal performance is observed, additional measures might be necessary, such as readjusting the BEMER SETS CLASSIC / PRO or changing to another location.
142
IEC 60601 TEST LEVEL
3 V
actual value
150 kHz to 80 MHz outside of the ISM bands
3 V/m
80 MHz to 2.5 GHz
COMPLIANCE LEVEL
3 V
3 V/m