Applications - Using The B.box Classic - Bemer PRO SET Handbuch

Applications – B.BOX Classic
short application (intensity levels 1-10)
>> Chose the desired intensity by pressing
the numbers 1-10.
>> Designate the desired application module
[A1 / A2] by repeatedly pressing [SET].
example – short application with intensity 9 (2 B.BODY application modules connected, port A1 selected)
>> Activate / deactivate the plus Signal
by pressing the left arrow key.
>> Start the short application with
[START / STOP].
magyar magyar français français english
eNGLIsh
After selecting the desired application,
press the left arrow key to switch the
plus Signal on / off.
Simultaneous operation is only
possible with 2 B.BODy application
modules connected (both using
the same duration and intensity).
The selected application module
blinks both during the selection
and during application use.
deutsch
deutsch
103