Set Up - B.box Classic - Bemer PRO SET Handbuch

: : settings of the b.box classic
Default settings – application parameters / basic settings– B.BOX Classic
The parameters [PLUS] and [INTENSITy] can be ad-
justed to become the default setting in the settings
menu. To access this menu, press and hold down
the [SET] key. you can select the parameters [PLUS]
or [INTENSITy] by using the arrow keys. To exit the
menu, select with the arrow keys [EXIT] and confirm
with the [SET] key.
setting the plus signal as default
>> I n the settings menu, select the menu item [PLUS]
with the arrow keys and confirm with [SET].
>> B y using the arrow keys, the plus Signal can be
switched on / off.
>> O nce the selection has been made, confirm with
[SET]. Now the plus Signal has been swtiched on or off.
108
default setting signal intensity
(only with the B.PAd)
While traveling, the B.PAD can be
used as a substitute for the B.BODy
by reducing the intensity to [LOW].
>> S elect the menu item [INT] in the
settings menu using the arrow keys
and confirm with [SET].
>> B y using the arrow keys you can
choose between [HIGH] (high in-
tensity) and [LOW] (low intensity).
>> O nce the selection has been made,
confirm with [SET].
setting the signal volume
>> P ress and hold down the [SET] key to
activate the settings menu.
>> W ith the arrow keys, select [VOLUME]
and confirm with [SET].
>> T hen choose the desired signal volume
by using the arrow keys.
The selection will always be acknowledged
with a signal in the chosen volume.
>> C onfirm selection with [SET].