Set Up - B.box Professional - Bemer PRO SET Handbuch

: : settings for the b.box professional
Default settings – application parameters
The parameters [PLUS] and [INTENSITy]
can be adjusted to be the default setting.
setting the plus signal as default
>> To switch the plus Signals on / off, press the
[PLUS] button before starting the program.
default setting signal intensity (only for B.PAd)
While traveling, the B.PAD can be used as a substitute
for the B.BODy by reducing the intensity to [LOW].
>> Press the [SET] button.
>> Press the button [HIGH / LOW] button.
When pressed, the button switches from [HIGH]
to [LOW] and vice versa.
120 120 120 120
Basic settings – B.BOX Professional
setting the signal volume
>> Press the [SET] button.
>> Press the [VOLUME] button.
>> Set the desired signal volume with
the help of the arrow keys.
The selection is always acknowledged
by a signal in the chosen volume.
>> Press the [SAVE] button to save
your settings.
Confirmation of the [SET] button
is possible only if no application
is active.