Recommended safety distance between portable and mobile RF telecommunication devices and the BeMeR set cLAssIc / PRO
The BEMER SET CLASSIC / PRO is designed for operation in an electromagnetic environment, in which the RF disturbances are controlled. The customer or the user of the BEMER SETS CLASSIC / PRO
can help to prevent electromagnetic disturbances by keeping a minimum distance between portable and mobile RF telecommunication devices (transmitter) and the BEMER SET CLASSIC / PRO –
depending on the power output of the communication device, as indicated below.
OUTPUT POWER
OF THE TRANSMITTER W
0.01
0.1
1
10
100
For transmitters whose maximum output power rating is not listed in the table above, the distance can be determined by calculating the equation on each column,
where P is the maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer.
SAFETY DISTANCE, DEPENDENT ON THE TRANSMITTED FREqUENCY m